Helpful Tips for Power Washer Roof Cleaner

Helpful Tips for Power Washer Roof Cleaner

When it comes time to clean your roof, you might be tempted to use a power washer roof cleaner. After all, it can get the job done quickly and easily. But there are a few things you need to keep in mind before using a power washer on your roof. Here are some helpful tips for using a power washer to clean your roof.

Tip #1 – Use the right detergent for your roof:

There are many different types of power washers, therefore it’s important to know what type you have before buying any kind of soap. As a general rule, if your water pressure is less than 3500 psi it’s best to use an environmentally friendly detergent specially designed for roof cleaning. These roof cleaners usually come with a hand sprayer and the right pressure is around 1700 to 2000 psi.

If you’re using an electric pressure washer, then set your water pressure under 1000 psi for best results and use the same power washer solvent as above. If your water pressure is over 3500 psi, it’s safe to use a regular high-pressure soap and follow the safety precautions.

Power Washer Roof Cleaner
Dirty Roof and Clogged

Tip #2 – Start at the top and work your way down.

It’s usually best to start with the upper parts of the roof, closest to where you’ll be working, and then move towards the lower part of the roof. This helps prevent any debris from your roof from dropping to the lower part of your roof when you aren’t there. Just make sure to keep an eye on who is walking under your house or in your yard, if anyone will be passing by during the clean.

Tip #3 – Beware of moss and algae.

If you’re noticing a lot of green streaks running down your roof, it’s likely that you have moss or algae growing on your roof. These are very slippery and can be difficult to remove so caution is important. When cleaning moss or algae it’s best to use vinegar or a bleach solution.

Tip #4 – Beware of shingles.

Shingles come in many different colors and styles so it’s important to know what kind you have before trying to clean them. If you notice that your shingles are curling or missing, it might be time to replace the damaged ones.

If your shingles are intact, then cleaning them is actually very easy with a power washer. Just remember not to point the spray nozzle right at the shingles, spray at an angle to get them clean.

Tip #5 – Let your roof dry completely before staining or sealing it.

If you plan on applying any protective sealant to your roof, then it’s best to wait for it to dry completely. This could take anywhere from one day to two weeks depending on weather conditions. If it’s going to take a while for your roof to dry, cover it with a tarp so the rain won’t get in and add moisture.

If you plan on staining your shingles, then don’t use a power washer because water will seep into areas where you don’t want it to go. Let your roof dry completely, then stain it with a brush or roller.

Tip #6 – Keep an eye on your gutters too.

If you have to use a ladder to clean the gutter, be sure not to walk under the ladder as this makes it less stable and can be dangerous with power tools nearby. Just remember to use extra caution when you’re on a ladder. While cleaning, also keep an eye out for any loose shingles that need to be replaced.

Power washers are great tools to have around the house but they should only be used with proper protection and care. Just remember to follow these helpful tips before using a power washer on your roof.

Roof Cleaning
Roof Cleaning
First Class Clean
1325 Kirkland Rd Suite 101, Raleigh, NC 27603
(919) 210-6899
Scroll to Top